Plumbing In A Washing Machine: A Quick and Concise Guide

Kyle — Tue, 03 Nov 2009 09:51:08 +0000

Plumbing in a washing machine is an easy task but it consumes a lot of time. You can easily find the instructions on the web. The best way to do it is using push fit fittings which makes the DIY job extremely easy. The first and foremost step is deciding the right place for your washing machine. You should make sure that there is a hot and cold water supply nearby. Furthermore and electric switch should also be there so that the appliance can be easily connected.

You should always choose the push fit fittings that are the easiest type of connection available in the market. In the push fit fittings for washing machines you will have to cut the existing pipe and push the pipes into the fitting. The water actually needs isolation to the pipe you are going to cut into two. If the system has isolating valves in between the main supply then you may consider yourself fortunate. On the other hand, if there are no isolating valves then you will have to isolate water in the main water inlet stopcock. After the isolation of water you should cut through the pipe and enter them. The pipes may have some water left in it and you should be ready to clean it with some cloth in your hand.

Different pipes are cut using different tools and you should be careful about that. After cutting the pipe you should fit the T piece and another pipe. Then you should fix another washing machine tap which will complete the whole installation process.

How to Install a Washing Machine

Lindsey — Wed, 18 Feb 2009 13:00:44 +0000

If there is any equipment that requires to be installed with care then it must be the washing machine. A washing machine if not installed properly will lead to problems and repairs. It is essential that you seek the services of a professional to get your washing machine installed. However, if you are the Do It Yourself type and are great with tools then you can do it all by yourself by just following the installation instructions provided in the manual.

The pipes you require for installation include both hot and cold-water bibb valves, and a drain hose standpipe. Of course if you lack a bibb valve at home, then you need to contact your plumber or install your own using something like the Makita 6827 screwdriver. The standard hose bibb needs to be threaded into the brass female winged fitting of the hot and cold water supply lines. The washer is connected to the water pipe through a rubber hose. The drain standpipe is installed along with a trap just above the floor.

Follow all the instructions provided in the installation manual and hook up the water inlets and outlets with proper care. Ensure that your washing machine lies on level floor or have the legs adjusted. If not leveled properly, the machine will wobble while spinning. A lot of noise will result due to this and the washing machine also moves around.

Installing a washing machine is not a very difficult job if you follow all the instructions mentioned in the installation manual with absolute care. If you have any doubts during the installation process then it is ideal that you call up a professional so he can handle the job well.

Home & Living News » washing machine installation

Plumbing In A Washing Machine: A Quick and Concise Guide

How to Install a Washing Machine